[C-Clips-30]
In order to keep your motor in top running condition, you occasionally have to take it apart for cleaning, or to install new bearings. The Scorpion HK-series Helicopter Motors are held together with a spring steel C-Clip, and have a wave washer under the clip to maintain proper bearing tension. Every once in a while, when you are taking apart your motor, the C-Clip goes flying off, never to be seen again, or you drop it on the floor and simply cannot find it. For these times we offer the Scorpion C-Clip Kits.
USE FOR: The Scorpion HK-32 C-Clip Kit are the factory replacement C-Clip, washers & set screws for all HK-30 & HK-32 Series Helicopter Motors.
4 x C-Clips
4 x Set Screws
4 x Washers