ION RC - Deluxe 3D Main Frame Covers (Yellow / Blue) - Goblin Raw 420

NO MORE STICKERS !

A little info about the frame covers:

• There are over 2 dozen (and growing) slightly different patterns, but the difference is only for the thin black random lines that you see on the covers, all other main parts of the print will stay the same. Having multiple line patterns takes us a little more time of coarse, but we wanted to keep your Raw 420 looking unique at the field.. So if you get a set, and your buddy at the field has a set, odds are theirs will likely have a different pattern than yours.
• The multi-color, neon yellow with blue accents match the stock RAW 420 canopy colors, we went through a lot of back and forth with our supplier to find just the right color dyes to match the blue on the canopy, and our Neon yellow color is a perfect match when compared to the stock plastic yellow parts.
• We only use the highest grade polymers that are all 100% made in the USA with the highest grade dyes & UV dyes, our neon UV colors pop like crazy, especially when you get them outside! Under a black UV light they are blindingly bright! And will outlast any sticker when it comes to fading issues from the Sun, or weather in general(read bottom of page for more info on our Co-polyester material)
• The frame covers also look different depending on the angle you look at them, they truly are 3D, with depth.
• Super quick and easy to change out for other types/colors(coming soon), takes 5 minutes at most to swap both sides for another color/type since no glue, tape or any other sticky things are needed to install them.
• Weight: 9g per side.

Designed, by Dave Mullen, owner of Anythingheli.com, and ION RC.

"I hope you enjoy these on your RAW 420 as much as I do"

Dave

(PLEASE NOTE: pictures below are prototype covers, the picture above is the finished retail product)

Information about the material used to make these artistic main frame covers:

   Our specially blended co-polyesters are ultra resistant to the sun's UV rays, nitro fuel, gasoline, grease, and most other chemicals that might happen to be on or around your model. It's also ultra cold resistant (very similar to a plastic gas can), no brittleness in very cold weather. For our helicopter parts we only wanted to use a material that was "made" to be outdoors. It had to be ultra resistant to the sun, rain, cold weather, gasoline, nitro fuel, all types of grease, thread lock, etc...

  We just wish it was easier to print with, LOL, but that's our job, yours is to enjoy the products we make for years to come.

Includes:

1x each left and right side frame cover

2x 2.5mm washers

2x self-tapping screws

3x special flanged nut (1 extra just in case)