ION RC - 120T BEVEL CUT MAIN GEAR - GAUI X4II* / X5

•  * Note to Gaui X4II pilots, the gear is slightly larger diameter than the stock straight tooth red or black gears, you may need to sand or dremel a very small amount of carbon from the X4II main frame so the gear does not touch/rub the frame when in use. A dremel tool is suggested. This is not an issue on the Gaui X5.

Features:

• Helps lower gear noise due to its Helical (slant) cut teeth.
  
• Helical gears have more strength than strait cut gears, this is mainly due to a greater tooth contact area compared to strait cut gears(eg. a slant cut, or helical cut gear will have about 2 times more tooth area in contact at any one time).
• USE FOR: GAUI X4II / X5 / X5 FES / Formula / X5 V2
• Includes (1) Helical Main Gear

• PLEASE NOTE: This Bevel Main Gear must be used with the following GAUI X4II, X5 Bevel cut pinions (they are for 5mm motor shaft): (14T)-208788, (16T)-208790