Specifications:

●Overall Length (with Canopy): 709mm
●Main rotor diameter: 858mm (Main Blades 385mm)
●Main blade length: 350~386 mm
●Overall Height: 212mm
●Overall Width: 87.8mm
●Tail Blade Length: 60~71 mm (accepts tail blades with a 2.6mm root, and 2mm hole)
●Tail Rotation Diameter: 172mm (70mm)
●ESC: Minimum 50A ESC
●LiPo battery: 1250 ~ 1800 mAh (1550mah suggested for 3D)
●BL Motor : 2520 ~ 3226 (Suggested 1400~1600KV) (1580KV is suggested)
●Weight: Airframe only:515g ±3%,

**Main Blades shown in photo below are NOT included**

Tools and Equipment for Assembly - (*not included)

*Required For Operation

*1.5 mm Hexagon Screw Driver
*2 mm Hexagon Screw Driver
*2.5 mm Hexagon Screw Driver
*Philips Screw Driver
*Lubricant / one-way bearing grease
*C-clip pliers, Needle-nosed pliers
*General thread lock
*This kit does not include a motor, or any other electronics, you will need to purchase them seperatly.
*Available pinions for X3 are as follows (Pinion 10T~13T)

Also Required For Operation

*Transmitter(6-channel or more, helicopter system)
*Receiver(6-channel or more)
*CCPM Micro Cyclic Servos x3 / Micro or Mini Tail Servo x1(Mini size tail suggested for hard 3D)
*LiPo Battery :3S / 4S / 6S
*ESC: 50A or higher ESC recommended
*2 Blades CF main blades (350~385mm)
*Flybarless System
*10~13T Pinion Gear
*Brushless Motor Suggestion:

• Best motor option: Xnova 2618-1580
  
• Other Motor Options: Scorpion 2520-1580 / Gaui GM-505 / Scorpion 3226-1400 / Scorpion 3226-1600