Loading... Please wait...


Our Newsletter

SCORPION - 4535 Shaft Kit XL (6 x 50mm)

  • Image 1
Ships within 24hrs
Calculated at checkout

Sorry but this item is currently unavailable.

Please check back at a later stage.

Product Description

SCORPION - 4535 Shaft Kit XL (6 x 50mm)

  • This shaft has 50mm of 6mm shaft for the pinion.


  • The Scorpion HK-4535 motors are built with 10mm hardened steel shafts that will last through countless hours of flying fun, but occasionally, on a "Less than Perfect" landing, you may bend or break one. For these occasions, we offer factory replacement shafts for all the HK-4535 series Scorpion Helicopter Motors.

    This extended shaft for the HK-4535 series motors measures 10mm in diameter, and is 116mm in long. The 50mm pinion end of this shaft is ground down to 6mm to allow the user to install 6mm pinion gears/pulleys. The shaft kit will also fit other brushless motors that require a 10mm shaft of this length. The shafts can be cut shorter with a Dremel tool with a cut-off wheel if necessary to fit other motors.

    Note: The shafts in the Scorpion motors are a slight press fit into the aluminum front housing. The shafts will not just slide out when the set screws are removed. They need to be pressed out in a bearing press, or in a drill press, with the front housing of the motor supported in a block of wood to prevent warping the front housing.


Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Add to Wish List

Click the button below to add the SCORPION - 4535 Shaft Kit XL (6 x 50mm) to your wish list.

SSL Secure by GeoTrust