Scorpion HK-40xx & HKIII-40xx Series Motor Bearing Kit

In order to keep your motor in top running condition, you need a good set of bearings. Occasionally, after a crash or landing in the dirt, the bearings can become damaged and need to be replaced. The Scorpion HK-40mm Motor Bearing Kit includes a pair of original equipment replacement bearings to fit the Scorpion HK-4015, HK-4020, HK-4025, HK-4035 and HK-4225 Series motors as well as the Scorpion S-4035 series airplane motors.

These bearings measure 16mm OD x 8mm ID x 5mm thick, and are an exact replacement for the stock bearings that come with the motors.

Please note, The bearings are an exact fit into the motor housings, so they do fit snugly. When removing the old bearings, you may need to gently tap them out. However, when installing the new bearings, do not tap them in with anything, as this can dent the ball races and ruin the bearings. When installing ball bearings they need to be pressed in by the outer part of the race. Never apply pressure to the inner race, as this can damage the bearing and lead to premature failure.