Specifications:

●Overall Length (with Canopy): 709mm
●Main rotor diameter: 808mm (Main Blades 360mm) 858mm (Main Blades 385mm)
●Main blade length: 350~385 mm
●Overall Height: 212mm

●Overall Width: 87.8mm
●Tail Blade Length: 60~68 mm
●Tail Rotation Diameter: 164mm (62mm)
●ESC: Minimum 50A ESC
●LiPo battery: 1450 ~ 1800 mAh
●BL Motor : 2520 ~ 3226 (Suggested 1400~1600KV)
●Total weight: 515g ±3% (kit with canopy,w/o electronics, blades and batteries.)

**Main Blades are NOT included**

Tools and Equipment for Assembly - (*not included)

*Required For Operation (not included)

*1.5 mm Hexagon Screw Driver
*2 mm Hexagon Screw Driver
*2.5 mm Hexagon Screw Driver
*Philips Screw Driver
*Lubricant / one-way bearing grease
*C-clip pliers, Needle-nosed pliers
*General thread lock
*4 available pinions for X3L are available (Pinion 10T~13T)

Also Required For Operation (not included)

*Transmitter(6-channel or more, helicopter tx system)
*Receiver(6-channel or more)
*CCPM Micro Cyclic Servos x3 / Micro (or) Mini Tail Servo x1(Mini size tail servo suggested for hard 3D)
*LiPo Battery : 6S 1450mah ~ 1800mah
*ESC: 50A or higher ESC recommended
*Main rotor blades (350~387mm)
*Flybarless System (eg. IKON, Spartan, etc..)
*Motor Pinion

*Other general helicopter building supplies