Loading... Please wait...
Categories
Our Newsletter
ALIGN Aileron Carbon Fiber Linkage Rod Set H70068 - TREX 700E
Price:
$7.99
SKU:
H70068
Brand:
Availability:
Usually ships within 24hrs
Shipping:
Calculated at checkout
- Home
- Helicopter Parts
- ALIGN Aileron Carbon Fiber Linkage Rod Set H70068 - TREX 700E
Product Description
| ALIGN Aileron Carbon Fiber Linkage Rod Set H70068 - TREX 700E | |
 |
|
| Illustration 1: Mix thoroughly suitable amount of epoxy. | Illustration 2: Apply generous amount of epoxy on the tips of carbon tube after sliding over the linkage rod. (Note: for quick drying epoxy, work fast as it must be applied prior to curing) |
 |
|
| Illustration 3: Slide the carbon end caps on both sides of the carbon tube. | Illustration 4: Thread the ball links onto the linkage rod until the base to base length is 97.5mm. |
 |
 |
| Illustration 5: If gap exists between the ball link and end caps after correct length has been achieved, slide the end caps outwards to cover the gaps (note: must be done before epoxy cures) | Illustration 6: Wipe away excess epoxy and set it aside to cure. |
 |
 |
| Illustration 7: Pop the finished link back between aileron servo horn and bell crank. | |
 |
|
| Package: | |
 |
|
| Instruction: | Specification: |
| ●Use for T-REX 700E. | ●700E Linkage x 4(2x110mm) ●700E Aileron Control rod Carbon Fiber Shaft x 8(4x5.4x6.5mm) ●700E Aileron Control rod Carbon Fiber Tube x 4(2.2x3.9x96mm) ●700N Ball Link x 8(5x20.5mm) |
Find Similar Products by Category
Add to Wish List
Fan us on Facebook
Follow us on Twitter
Watch us on YouTube